Home page

How to use a 3d fogging fireplace

Apr 16,2024

The steps for using the 3D Fogging Fireplace are as follows:

Fill with water. Remove the fake woodpile and fill with pure water through the misting water injection port. For the first use you will need to fill 2Kg (2L) of water, thereafter 1Kg (1L) of water for each use, this will produce a flame effect for approximately 5 hours.

Replacing or installing bulbs. If a new or replacement bulb is fitted, remove the cover screws and insert the correct size bulb in the lamp holder.

Turn on the power. Stack firewood on the cover plate, plug it in and press the power switch. The firewood pile will be illuminated by the light and the flame will simulate wafting out of the pile after about 3 seconds.

Adjusting the Flame. The flame buttons on the fireplace can be used to adjust the flame color and brightness by using the plus and minus symbols on the buttons. The remote control also offers synchronized button operation, allowing the user to switch flame color and size.

Connecting Smart Devices. If desired, Bluetooth can be connected by long pressing the Bluetooth button on the top left corner of the remote control. Use Doodle Smart APP  to connect the device, turn on Bluetooth, WiFi and location, match the device and add and complete the connection. You can adjust the flame color, stall and timer off the fireplace in the APP. It can be adjusted up to 9 hours timed off and can be operated to add water and drain.

Connect music device. After the Bluetooth device RS01 is connected to your cell phone, you can play music and adjust the volume level, including controlling the switch of the previous or next song.

The 3D fogging fireplace works by using ultrasonic technology to atomize liquid water and create a realistic three-dimensional flame effect through light projection.

■

NEW HOLOGRAPHIC FIREPLCE

Mar 06,2025